Dempsey_86 Posted July 9, 2023 Posted July 9, 2023 Original Xbox Case swap When working with version 1.6 motherboard's there are a few things to watch out for. First of all is which version of the case you are installing the board in. If you are installing the 1.6 board in a 1.0 - 1.5 case you will need to remove an extra stand off that the 1.6 does not have. Failure to do so will result in the Xbox not powering on anymore without the applying fix explained below. Locate this stand off on the bottom of the 1.0 - 1.4 case and remove the tin ground tab by bending Author Dempsey_86 Category OGXbox Modding Submitted 07/09/23 11:19 AM Updated 07/09/23 12:32 PM Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.