Dark Destiny Posted April 8, 2024 Posted April 8, 2024 NMB Fan - 2810KL-04W.B50 This fan is simple to open. Just remove the sticker from the back, remove the red "spring ring" (be careful removing this ring!) and done. Delta Fan - 5310 Pretty simple to open the Delta fan. Just gently push them from behint on the blades or use the back of your tweesers (Use 2 tweesers to apply pressure on two sides at the same time). Both will work just fine. Take care not to lose the white round "pad". Nidec Fan - E34801-55MIC1 Pretty simple to open like the Delta fan. Just gently push them from behint on the blades. It needs slightly more pressure before the rotor comes of but at the end not to hard to manage. Sunon Fan - PKD1207PTV1-A B415 About this Sunon fan. I'm well aware that someone wrote that you just have to peel off the sticker of the front of the fan and drop some oil in. Well, that will not work. And you can see that in the image no.3. You're not be able to get the oil into the axle. The oil will just end up on the metal around it which has basicly no effect. That being said, you can add a little bit of oil or grease to the axle after you have take it appart but also that ain't change to much in the long term on this fan. Are these fans serviceable and is it worth it? Delta = Yes | Yes NMB = Yes | Yes Nidec = Yes | Yes Sunon = Basicly Yes (More or less) | No 1 2 Quote
Dark Destiny Posted 18 hours ago Author Posted 18 hours ago Update on the Sunon fan and clearing up a myth about the sticker. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.