tonywhite Posted April 7 Posted April 7 Hi all. Xbox 1.6 with aladdin xt plus2 installed. I want to flash the latest Cerbios. Flash SST 49LF020. I sew in the programmer, insert it into the chip, and as a result it tries to start and nothing. The chip wiring is standard, D0 wire too. What I'm doing wrong and what I'm doing right. Help me please. The installation diagram is below. Samsung memory chips. To be sure: 1. Didn’t copy anything to HDD 2. HDD standard 3. Cable component China and standard AV 4. The BIOS file that I’m trying to write is Cerbios Hybrid V2.3.1 BETA.bin Quote
SylverReZ Posted April 7 Posted April 7 What console revision do you have, and how are you programming the chip? Quote
tonywhite Posted April 7 Author Posted April 7 (edited) 42 minutes ago, SylverReZ said: What console revision do you have, and how are you programming the chip? 1.6 xgecu t48 Programmer (I do it as in the guides on YouTube for example Mad Mod Labs chanel) Edited April 7 by tonywhite 1 Quote
SylverReZ Posted April 7 Posted April 7 (edited) Okay, good. Did you make sure to connect BT on the chip to GND? Edited April 7 by SylverReZ Quote
tonywhite Posted April 7 Author Posted April 7 17 minutes ago, SylverReZ said: Okay, good. Did you make sure to connect BT on the chip to GND? YES Quote
SylverReZ Posted April 7 Posted April 7 Try reflowing the LPC pin header or install a LPC rebuild QSB. Quote
tonywhite Posted April 7 Author Posted April 7 4 minutes ago, SylverReZ said: Try reflowing the LPC pin header or install a LPC rebuild QSB. I have a second chip with stock firmware and it works great. The problem is most likely something unrelated to soldering. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.